Up to 95% less roll. A horizon that finally stays put.
Sealion delivers full-scope ZGYRO® stabilizer projects — sizing, supply, installation, commissioning, sea trial and after-sales support. Our sweet spot is the Z05–Z20 range for vessels up to ~23 m, and we handle bigger units (Z26 → Z200) for ships above 50 m on request.
Mechatronic, not hydraulic.
ZGYRO is the world's first gyro stabilizer series using a servo motor and gearbox for active precession control — replacing the hydraulic systems that leak, lag and need specialist service.
Five integrated systems. One smooth ride.
From the Z05 tender unit to the Z20.
Our focus is the small- and mid-range ZGYRO units — the sizes that fit on the boats most owners actually run in this region. Everything from a 6 m RIB up to a 23 m sport-yacht is covered out of the box.
See it in action.
Watch the difference a ZGYRO stabilizer makes — roll reduction you can feel immediately.
Standard range: Z05 → Z20.
The table below is the catalogue we stock-spec, install and service routinely. Power figures are operating draw; full specifications, install footprints and three-phase variants on request.
| Model | Hull length | Displacement | Anti-roll torque | Operating power |
|---|---|---|---|---|
| Z05 | ≤ 6 m | ≤ 2 t | 2,000 Nm | 200–400 W |
| Z07 | ≤ 7 m | ≤ 3 t | 2,800 Nm | 200–450 W |
| Z1 | ≤ 9 m | ≤ 5 t | 3,500 Nm | 300–550 W |
| Z1.5 | ≤ 10 m | ≤ 6.5 t | 4,500 Nm | 300–600 W |
| Z2 | ≤ 11 m | ≤ 8 t | 6,000 Nm | 700–1,000 W |
| Z2.5 | ≤ 12 m | ≤ 10 t | 7,500 Nm | 800–1,200 W |
| Z4 / Z4.5 | ≤ 14–15 m | ≤ 15–17 t | 12,000–13,500 Nm | 1,200–1,900 W |
| Z6 / Z7 | ≤ 16–17 m | ≤ 21–25 t | 18,000–21,000 Nm | 1,500–2,300 W |
| Z10 / Z12 | ≤ 18–19 m | ≤ 32–38 t | 30,000–36,000 Nm | 1,800–3,000 W |
| Z16 | ≤ 21 m | ≤ 50 t | 48,000 Nm | 2,300–3,300 W |
| Z20 | ≤ 23 m | ≤ 62 t | 60,000 Nm | 2,500–3,500 W |
ZGYRO's non-vacuum range scales well beyond our standard catalogue — Z26, Z35, Z50, Z80, Z110, Z150, Z200, all the way up to the Z1000. We can size, supply and install for commercial ships, work boats and superyachts over 50 m. Send us the hull dimensions and we will quote.
We don't just sell the unit.
A gyro stabilizer is only as good as its install. Sealion handles every step in-house.
- 01Vessel sizing
- 02Model selection & quote
- 03Supply & logistics
- 04Onboard installation
- 05Commissioning & sea trial
- 06Warranty & service
Smoother sailing starts with one email.
Send your hull length, displacement and intended cruising area. We'll come back with a sized recommendation and total project price.
Contact Sealion →